Hazard Identification, Risk Assessment and Control (HIRAC) of Fablab Setting and Infrastructure at President University

Bilah Samping Artikel

PDF (English)
Terbitan
Vol 23 No 1 (2026): Jurnal Kesehatan Lingkungan Volume 23 No. 1, Januari 2026
Diterbitkan: Jan 28, 2026

Isi Artikel Utama

Yosef Barita Sar Manik
President University, Faculty of Engineering
Gracia Natalie Emmanuela Manurung
President University, Faculty of Engineering
Jaqueline Andrea Kimberly
President University, Faculty of Engineering
Wanti Rahayu
President University, Faculty of Engineering
Muhammad Labib Haidar
President University, Faculty of Engineering

Abstrak

This study demonstrates the methodological contribution of applying the Hazard Identification, Risk Assessment, and Control (HIRAC) framework to a previously underexplored setting: an academic Fabrication Laboratory (FabLab). Key findings reveal that the facility’s pre-assessment safety profile was medium-high, primarily due to critical hazards such as exposed electrical cables and obstructed emergency equipment. By employing a systematic, qualitative approach and implementing a tailored control plan based on the hierarchy of controls, the study successfully reduced the overall risk level to low-medium. The research concludes that the HIRAC method offers a replicable and effective model for proactive risk management in academic makerspaces, ultimately enhancing safety culture through structured assessment and prioritized intervention.

Rincian Artikel

Bagian
policies
Creative Commons License

Artikel ini berlisensiCreative Commons Attribution-ShareAlike 4.0 International License.

Penulis yang mempublikasikan artikel di Jurnal Kesehatan Lingkungan menyetujui ketentuan sebagai berikut:

  • Penulis tetap memegang hak cipta dan memberikan kepada jurnal hak untuk melakukan publikasi pertama.
  • Karya dilisensikan di bawah Creative Commons Attribution-ShareAlike 4.0 International License, yang mengizinkan pihak lain untuk membagikan (menyalin dan mendistribusikan ulang materi dalam media atau format apa pun) serta mengadaptasi (mengubah, mengembangkan, dan membuat karya turunan) untuk tujuan apa pun, termasuk tujuan komersial, dengan ketentuan bahwa atribusi yang tepat diberikan kepada penulis asli dan sumber, tautan ke lisensi disertakan, serta setiap perubahan yang dilakukan harus dinyatakan.
    Setiap adaptasi, modifikasi, atau karya turunan wajib didistribusikan dengan lisensi yang sama (CC BY-SA 4.0), dan tidak diperkenankan menambahkan pembatasan tambahan yang dapat mengurangi hak-hak yang diberikan oleh lisensi ini.
  • Penulis diperkenankan untuk membuat perjanjian tambahan secara terpisah terkait distribusi non-eksklusif atas versi karya yang telah dipublikasikan oleh jurnal (misalnya, mengunggahnya ke repositori institusi atau memasukkannya ke dalam buku), dengan tetap mencantumkan bahwa karya tersebut pertama kali dipublikasikan di jurnal ini.

Referensi

N G. How to Make Almost Anything: The Digital Fabrication Revolution. Foreign Affairs [Internet]. 2012. Available from: http://www.jstor.org/stable/41720933

Claxton G, Hosie P, Sharma P. Toward an effective occupational health and safety culture: A multiple stakeholder perspective. J Safety Res. 2022 Sept;82:57–67.

Tziakou E, Fragkaki AG, Platis AΝ. Identifying risk management challenges in laboratories. Accreditation Qual Assur. 2023 Aug;28(4):167–79.

Hale A, Borys D. Working to rule, or working safely? Part 1: A state of the art review. Saf Sci. 2013 June;55:207–21.

Manik YBS, Mayriza AL, Putri BM, Keisha Fawwaaz, Huri KK, Maulidinnisa VP. Hazard Identification, Risk Assessment and Control (HIRAC) on Water Solid Contents Determination at Environmental Chemistry Laboratory of President University. J Ris Teknol Pencegah Pencemaran Ind. 2024 Nov 29;15(2):94–102.

Telaumbanua M, Marbun C, Siboro BAH. Perancangan Sistem Manajemen Keselamatan dan Kesehatan Kerja Pada Laboratorium Desain Produk dan Inovasi. JISI J Integrasi Sist Ind. 2022 Mar 15;9(1):47–57.

Xu Y, Ma D, Li J, Zhang J, Wang Q, Dou Z. Quantitative risk assessment method for laboratory safety: Based on Mond Index. J Loss Prev Process Ind. 2026 Jan;99:105835.

Laboratory Safety Guidance [Internet]. Available from: https://www.osha.gov/sites/default/files/publications/OSHA3404laboratory-safety-guidance.pdf

Rajanen D, Rajanen M. Safety Culture in Digital Fabrication: Professional, Social, and Environmental Responsibilities. In: Proceedings of the FabLearn Europe 2019 Conference [Internet]. Oulu Finland: ACM; 2019 [cited 2025 Nov 6]. p. 1–3. Available from: https://dl.acm.org/doi/10.1145/3335055.3335068

Zohar D. Thirty years of safety climate research: Reflections and future directions. Accid Anal Prev. 2010 Sept;42(5):1517–22.

Hartik A, Pratiwi P. Kebakaran di Gedung Fakultas Teknik Universitas Brawijaya, Peralatan Laboratorium Hangus Terbakar. Available from: https://regional.kompas.com/read/2021/09/27/103957578/kebakaran-di-gedung-fakultas-teknik-universitas-brawijaya-peralatan

Mahasiswi S2 IPB Tewas Akibat Kebakaran Laboratorium, Ini 8 Hal Diketahui Baca artikel detiknews, ". 2023 Agustus; Available from: https://news.detik.com/berita/d-6888507/mahasiswi-s2-ipb-tewas-akibat-kebakaran-laboratorium-ini-8-hal-diketahui

Dewantari NM, Ferdiansyah M, Herlina L, Mariawati AS, Umyati A. Risk analysis and safety measures: JSA, HIRA, and FTA in LPG distribution. J Ind Serv. 2023 Dec 6;9(2):247.

García-Ruiz ME, Lena-Acebo FJ. FabLabs: The Road to Distributed and Sustainable Technological Training through Digital Manufacturing. Sustainability. 2022 Mar 26;14(7):3938.

AlShammari W, Alhussain H, Rizk N. Risk Management Assessments and Recommendations Among Students, Staffs, and Health Care Workers in Educational Biomedical Laboratories. Risk Manag Healthc Policy. 2021 Jan;Volume 14:185–98.

Li X, Zhang L, Zhang R, Yang M, Li H. A semi-quantitative methodology for risk assessment of university chemical laboratory. J Loss Prev Process Ind. 2021 Sept;72:104553.

International Organization for Standardization. (2018). ISO 45001:2018—Occupational Health and Safety Management Systems. Available from: https://www.iso.org/standard/63787.html

Goetsch DL. Occupational safety and health for technologists, engineers, and managers. 7th ed. Upper Saddle River, N.J.: Prentice Hall; 2011.

Syaputra A, Muslim B. Implementasi Metode Quantitative dan Qualitative Pada Risk Analysis & IT Risk Management. Fakt Exacta [Internet]. 2022 June 4 [cited 2025 Nov 16];15(1). Available from: https://journal.lppmunindra.ac.id/index.php/Faktor_Exacta/article/view/12040

Padang AGR, Ambarwati A, Setiawan E. Penilaian Manajemen Risiko TI Menggunakan Quantitative dan Qualitative Risk Analysis. SISTEMASI. 2021 Sept 30;10(3):527.

Bora MA, Subakti Eko Pratama, Larisang, Ririt Dwiputri Permatasari, I Made Sondra Wijaya. Implementasi Metode HIRAC (Hazard Identification, Risk Assessment, And Control) untuk Meningkatkan K3 di Laboratorium PT. XYZ. Ranah Res J Multidiscip Res Dev. 2024 Dec 27;7(2):987–97.

Mohammad Ikrar Pramadi, Hadi Suprapto, Ria Rahma Yanti. PENCEGAHAN KECELAKAAN KERJA DENGAN METODE HIRADC DI PERUSAHAAN FABRIKASI DAN MACHINING. JENIUS J Terap Tek Ind. 2020 Nov 30;1(2):98–108.

Adiputra M. RISK CONTROL ENHANCEMENT USING SAFETY CLIMATE FACTORS FOR HIRARC METHOD IN STEEL PRODUCT INDUSTRY [Internet]. 2015. Available from: http://eprints.utm.my/53531/1/MohamadFarizAdiputraMFKM2015.pdf

Aruan KMN, Singgih ML. Pengendalian Risiko Kecelakaan HSSE pada Proses Pembuatan Pipa Baja. J Tek ITS. 2021 Dec 22;10(2):B52–7.

Sunarto, Santoso H. Buku Saku Analisis Pareto [Internet]. Edisi Pertama. Prodi Kebidanan Magetan, Poltekkes Kemenkes Surabaya; Available from: file:///C:/Users/New%20User/Downloads/BukuSakuAnalisisPareto.pdf